FSC-BT618 CC2642R BLE 5.2 Zendingsmodule

FSC-BT618 is a wireless microcontroller (MCU) BLE module targeting Bluetooth 5.2 Low Energy applications. Very low active current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications. FSC-BT618 contains unique ultra-low power sensor controller for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. It supports advanced BLE 5.x features: Hoge snelheid met le 2mbit phy, Lange afstand met LE gecodeerde pHY, 255 Bytes advertentie -extensies, GAT, Naar/geit, SMP, and L2CAP profiles. With Feasycom firmware, developers can control all Bluetooth functions by simple UART AT commands.

        • Van CC2642R Low Power Ble MCU om complete Bluetooth -protocolstapel uit te voeren
        • Geavanceerde ble 5.x -functies:
          • Hoge snelheid met le 2mbit phy
          • Lange afstand met LE gecodeerde pHY
          • 255 Bytes advertentie -extensies
        • RF -specificatie:
          • 2.4-GHz RF -transceiver compatibel met Bluetooth 5.2 Lage energie en eerdere LE -specificaties
          • Koppeling budget van 102 DB voor BLE
          • Uitstekende gevoeligheid van ontvanger (-95 dBm for Bluetooth low energy 1 Mbps), Selectiviteit, en het blokkeren van prestaties
          • Klas 1.5 steun (tot aan +5 DBM)
        • Algemeen:
          • 13mm x 26,9 mm stempel 36-pins pakket
          • Ondersteuning van het centrale en perifeer
          • Steun de OTA -upgrade
          • Bluetooth -stapelprofielen: NAAR, Gatt, en andere BLE -protocollen
          • UART BAUD Rate -bereik: 1200 BPS ~ 921600 koord (standaard: 115200 koord)
          • Uart, I2C, Spi, PWM, 12-Bit ADC (200KS/S) interfaces
          • Ondersteunt acht capaciteitssensorknop
          • Geïntegreerde temperatuursensor
Chip Van CC2642R
Bluetooth -standaard Bluetooth v5.2 lage energie (Bloeden)
Zend kracht +5 DBM (Max.)
Ontvang gevoeligheid -105 DBM (Min.)
Profielen Bloeden: NAAR, Gatt, GAT, en andere protocollen
GPIO -telling 18
Interfaces Uart, I2C, Spi, ADC, DAC, PWM
Antenne Standaard ingebouwde antenne
Ondersteuning van externe Feasycom -antenne of andere antenne
Afmetingen (mm) 13 × 26.9 × 2.2
Bedrijfstemperatuur -40° C ~ +85 ° C
Opslagtemperatuur -40° C ~ +85 ° C
Voedingsspanning VDD: 1.8In ~ 3.8V
Industriële automatisering
Slimme gezondheidszorg
Smart home
Wearables
Draadloos IoT

    NAVRAAG

    Chat nu